Are You Looking for a tested flash file for the HelloTech M1 model then this is the right place to get it free with GDrive and MEGA links to download,
Why do You need to Reflash the Phone?
In most cases, the phone is stuck on the Logo due to software malfunction. Or sometimes it becomes just like a dead body and does not respond whether You try to power ON or Charge the phone in that case Reflashing the phone fixes the phone and reverts it back to the official ROM.
How to Flash HelloTech M1
- Make sure to install SPD Drivers and CM2SCR Tool
- Download and extract firmware files to the desktop.
- Take Full Backup in case something goes Wrong.
- Now Click on Flash/Download and connect Your phone to the PC holding the boot Keys.
- After Flashing is Done, Disconnect and Power ON the Phone manually.
Log
Operation : Read Flash [ v1.07 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Flash Ok, Size : 4.00 MiB
E328_ITL_H1401_HELLO_TECH_M1_20210716
Project Version: SC6531EFM_BAR
MMI Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
07-16-2021 09:38:05
LOG Version: V1.0.1
Saved to : C:\Users\Hasnain\Desktop\Hello Tech M1 Bkp\E328_ITL_H1401_HELLO_TECH_M1_20210716.bin
Done!
Elapsed: 00:00:54
Reconnect Power/Cable!
Download Hello tech m1 Firmware
File Size: 3.59 MB
Link Last Updated: June 2, 2023