Are You Looking for a Tecno pop 5 lte firmware file then this is the right place to get it free with GDrive and MEGA links to download. Tecno BD4 tested flash file SP9836A cpu.
Why do You need to Reflash the Phone?
In most cases, the phone is stuck on the Logo due to software malfunction. Or sometimes it becomes just like a dead body and does not respond whether You try to power ON or Charge the phone in that case Reflashing the phone fixes the phone and reverts it back to the official ROM.
How to Flash Tecno Pop 5
First of all, keep in mind flashing the new firmware can cause some data loss and sometimes stuck on the logo or completely dead, So before flashing a new file always take a backup of everything. Now follow these steps
- Download and install SPD Drivers and CM2SP2
- Extract Downloaded firmware to desktop
- Select TECNO > BD4_Pop-5-LTE as model in Base
- Open Tool select the file in Tool and click on flash
- connect phone holding volume down as boot key
- wait for the procedure to complete
- disconnect and manually power on the phone
LOG
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : BD4_Pop-5-LTE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
Device info :
Product Device : TECNO-BD4
Product Name : BD4-OP
Product Model : TECNO BD4
Product Brand : TECNO
Ver. Incmt : 220316V10
Display ID : BD4-SE656BCEF-RGo-OP-220316V10
Patch Level : RP1A.201005.001
Display ID : RP1A.201005.001 release-keys
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-03-05
Build Time : 16.03.2022
Product Info : BD4
Product Board : BD4
Board Platform : sp9863a
Product Manfct : TECNO MOBILE LIMITED
AndroidVer : 11
VlnrLevel : 0x00
SP9863A__11__RP1A.201005.001__BD4
Read : prodnv.img
ExtSparse : Compression ratio : 56%
Read : phase.cfg
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_l.bin
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Make : persist.img
Read : modem_l.bin
Read : deltanv_l.bin
Read : gdsp_l.bin
Read : ldsp_l.bin
Read : pm_sys.bin
Read : teecfg.bin
Read : boot.img
Read : dtbo.img
Read : super.img
Make : cache.img
Read : socko.img
ExtSparse : Compression ratio : 68%
Read : odmko.img
ExtSparse : Compression ratio : 20%
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : vbmeta_system_ext.img
Read : vbmeta_product.img
Read : cover.bin
Read : tranfs.bin
ExtSparse : Compression ratio : 3%
Make : userdata.img
Read : u-boot-spl.bin
Firmware size : 0x12D792EF8 ( 4.71 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:27:24
Download TECNO POP 5 LTE (BD4) Firmware
Version: 220316v10
File Size: 2.56 GB
Link Last Updated: June 2, 2023