Download Infinity CM2SCR Tool V1.07 | How to Flash SPD/RDA/Unisoc Phone

 Infinity CM2SCR Tool is an SPD CPU Flashing Tool. This tool is from Infinity Box or Infinity Dongle. Here is complete information and usage of this tool also download the complete latest setup file. Download Latest Version Infinity CM2SCR V1.07 Setup.

CM2SCR Supported CPU

  • SC6533x (RDA CPU)
  • SC6530 REV 0000 NOR
  • SC6531 REV 0000 NOR
  • SC6531 REV A000 NOR
  • SC6531 REV C000 NOR
  • SC6531 REV E000 NOR

What is New?

Infinity Chinese Miracle II SCR/SPD-RDA v1.07 - RDA8955x CPU line supported

RDA8955x is an extra cheap SoC with 2G/GPS support.
It is used in cheap wearable, IoT and feature phones.

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC770x ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC770x
RDA Mirco: RDA8955G, RDA8955GE, RDA8955L
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Core
NewChip: Support RDA 8955 Line (8955G, 8955GE, 8955L)
BugFix: Support for some SC6533 revisions fixed ( Wrong PMT issue )

Support RDA 8955 Line (8955G, 8955GE, 8955L)

  • Identify ( Security info, compilation info, Hwinfo )
  • Format FS / Reset Settings
  • Read UserCode / PrivacyCode
  • Repair Security
  • Read Flash / FW
  • Write Flash / FW / LOD

Service
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: BOOTROM support improved ( RDA )
Changed: SVC ( Diag ) mode support optimized for modern UniSoc 89xx platforms

UserData
Changed: Security code read in FlashMode revised ( RDA )

Other
BugFix: Lot of small different changes and fixes
Option: GUI ( File -> GUI ) : allow select other interface mode
!* Default – standard V2 line GUI
!* Wide – best for big screen / big distance to monitor
!* Wide Log – extend log window to screen size. Optimal for most cases

Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC7702 ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC7702
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826
Core
NewChip: Support UNISOC 8910 (FLASH) under test
NewChip: Support IVY IoT (FLASH/SVC) under test
Changed: UpToDate Protocol changes for latest FP platforms ( UniSoc )
BugFix: Connection on SPRD tab
BugFix: BOOTROM mode on latest SC6533G branches
Support UNISOC 8910DM / UIS8910 chipset ( SVC mode )
Identify ( Security info, compilation info, modem info , APinfo )
Format FS / Reset Settings
Read UserCode / PrivacyCode
Repair Security
!* Generic types only
New Feature: SVC ( Diag ) mode support for SPRD / UniSoc
Identify ( Security info, compilation info, modem info )
Format FS / Reset Settings
Read UserCode / PrivacyCode
Repair Security
!* Generic types only
Service
BugFix: Security repair not allow use some “non-standard” combinations ( RDA / SPRD / UniSoc )
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: GUI revised for repair part ( CS info, Automatic complete at double click for security fields )
UserData
BugFix: Security code read in FlashMode revised ( SPRD )
Other
BugFix: Lot of small different changes and fixes

Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features

Supported CPU list:

Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
UniSoc: SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G:

Updated LOD tools ( Factory LOD support revised )
UserCode reading improved

Spreadtrum/UniSoc SC6530/6531/A/C/D/E:

New feature activated: Complete identification
During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
Readout naming changed to DeviceInfo details instead of flash size/flash vendor

Repair security revised
Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )

Spreadtrum/UniSoc other:
Protocol updated, error codes handling activated
SC6531 with 16MB flash support revised
FTM during flashing now make DNVM clean, FS clean and structure verification
UserCode reading improved
Some other bugfixes and small changes

Info:
“HardLock” detection feature for SP-locked device activated under test


How to Flash

Download Latest version and install setup. If you already installed and want to update then I recommend that first you uninstall the previous version and restart PC. After Restart, install the new version.

Download Stock Firmware/Flash File for your phone. Make sure you install RDA Drivers and SPD Drivers first. Open Tool

Read => Root any Android Device using Magisk Root [Exclusive Guide]

To Flash RDA SC CPU Mobiles

a. Extract .ilod firmware,

b. Click on Flash, After that click on Select and choose a correct .ilod flash file.

c. Now Click on Flash.

d. Turn off the phone and connect with your PC

To Flash SC65xx |SPD FP CPU Mobiles

a. Open CM2SCR Module and click on SC65xx | SPD FP.

b. From CPU select your phone’s Chipset and then open Flash Tab.

c. Click on Select and choose .bin file to flash. after selecting the flash file click on write flash and connect the phone with PC. In some cases required to hold boot key or use Boot Cable. Boot key is different in every case.

Note: Always Take Backup before any operations, User data and Nandroid Backup is necessary. We are not responsible for any loss/damage to your phone or data. IMEI Change is illegal only write original IMEI. All Tutorials and Articles on ALLABOUTFLASHING.COM are for educational purpose only. Kindly Read Privacy Policy

Download CM2SCR V1.07 Module

Version: 1.07

File Size: 12.15 MB

Link Last Updated: October 30, 2021

8 thoughts on “Download Infinity CM2SCR Tool V1.07 | How to Flash SPD/RDA/Unisoc Phone”

Leave a Comment