Are you looking for the KED B310 Flash file here is a download link for the model KED B310 Flash file and steps to learn how to flash this phone.
How to Flash
Follow the below Steps to flash this phone
- You must have an Infinity Dongle device. A software named Infinity CM2SCR and RDA Drivers (How to Install RDA Drivers β See Video on )
- After installing the above software and drivers You need to open the software and load the file given the links at the bottom of this page
Warning: Flashing a new File to the phone May Lead to a Bricked phone and Data lost so Always Take Backup of the phone.
Read Flash Log
Operation : Read FullFlash
======= Settings
Settings : SafeMode is Off [Fast]
Settings : Make IFF (MCU) file
Settings : Make Calibration file
Waiting phone ...
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init : 6C08F200
Settings registers ...
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4006
CPU_CN : RDA Micro CT , RDA8851B
==== FLASH
FL_VEN : 60C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
Initial : 81C0024C
==== Booting
Sending RamRun Loader ...
Set : 8809 , 00400000
Use : 8809_00400000_usb.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Flush : 0400F000
Loader run
Boot Done!
Read Flash now ...
Read Ok, 4194304 bytes read
Verify file...
Target BbCpu : CT8851B
Target Flash : flsh_spi32m
Project Info : C399B
[BIN] Saved as : C399B_CT8851B_flsh_spi32m.bin
Make FlashFiles
FATNV Check passed
FSCSC Check passed
CALIB Check passed
[IFF] File saved to : C:\InfinityBox\CM2RDA\Flash\IFF\CSD_C399B_CT8851B_flsh_spi32m.iff
[CAL] File saved to : C:\InfinityBox\CM2RDA\Flash\IFF\CSD_C399B_CT8851B_flsh_spi32m.ifc
Build done
Done
Elapsed: 00:00:33
Reconnect Power/Cable!