Updated Infinix/iTel/Tecno V3 (Nov’23) in Preloder Mode

• Supported Chipsets:
• MT6761
• MT6765
• MT6768
• MT6781
• MT6785
• MT6833
• MT6877
• MT6893

Added Storage Health Check on Boot

• It will show PreEOL, LifeTime Estimate A, and LifeTime Estimate B when possible.

Updated Xiaomi Mi Account Relok Fix Function

• Tested on MIUI 14

Added Safe Format (Oppo) Option

• We still recommend using Erase Data to Format
• If the device is stuck in recovery, use Fix Recovery only
• Do not do anything except Fix Recovery

Added Erase Data + FRP Option

Updated Fix Recovery Function

Revised Format Functions List

Updated Read Information on devices with Dynamic Partitions and A/B Slots

Disabled “SWITCH HI-SPEED” Option by default

• Using Hi-Speed connection may cause issue with poor quality cable
• If you want to use Hi-Speed connection, please tick “SWITCH HI-SPEED” checkbox

Fixed Minor GUI Issues

Important Notes:

• You can flash device with both BROM and Preloader mode
• If default DA does not work, use own DA in custom DA
• Force BROM may not work on new security, use Test Point instead
• When using Test Point, you must select Preloader in PL (not needed when flashing)
• If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
• You can test PRELOADER EXPLOIT on any device with DA from Vendor even if that DA does not allow Write or Erase.

Added New Preloader Exploit Method
– Supported Chipsets:
– INFINIX (MT6739/61/63/65/68/81/85/MT6833/77/93)
– INFINIX MT6765 [1]
– INFINIX MT6768 [1]
– INFINIX MT6768 [2]
– OPPO/REALME/ONEPLUS MT6765
– OPPO/REALME/ONEPLUS MT6768
– OPPO/REALME/ONEPLUS MT6833
– OPPO/REALME/ONEPLUS MT6877
– OPPO/REALME/ONEPLUS MT6893
– SAMS MT6765 [A03S]
– SAMS MT6765 [A04E]
– SAMS MT6765 [A04]
– SAMS MT6833
– VIVO (MT6761/63/65/68/71/81/85/MT6833/53/73/77/85/93)

Tested devices:
– Infinix Smart 7 (X6515)
– OnePlus Nord 2 5G
– OnePlus Nord 2 CE 5G
– Tecno Pop 7 Pro (BF7)
– Vivo V21 5G (PD2083F)
– Vivo V23 5G (PD2167)
– Vivo V23e (PD2159F)
– Vivo Y12s (PD2036F)
– Vivo Y16 (PD2216F)
– Vivo Y17 (PD1901F)
– Vivo Y1s (PD2014F)
– Vivo Y20s (PD2066F)

Supported Functions:
– Firmware Read/Write
– Security Read/Write
– RPMB Read/Write
– Vivo Security Repair

Custom DA (CUST_DA) Option
– You can select own DA if needed to use with PL_EXPLOIT.
– Be informed, that DA must be from same vendor, as Generic DA may not work.
– PL_EXPLOIT will work even if DA from vendor has read only access.

Added Fix Recovery Option
– Use this function to fix phones stuck in recovery mode after Safe Format

Updated Safe Format Method
– There should not be anymore recovery issue.
– If you face issue, just use Fix Recovery option from Format functions
– You can use Format userdata instead on such phones.

Important Notes:
– You can flash device with both BROM and Preloader mode
– If default DA does not work, use own DA in custom DA
– Force BROM may not work on new security, use Test Point instead
– When using Test Point, you must select Preloader in PL (not needed when flashing)
– If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)

What’s New:

Added PL Exploit in Preloader Mode
– Untick DISABLE AUTH
– Tick PL EXPLOIT and select Vendor
– Execute any operation like Flash/Format/FRP etc.
– Connect device in preloader mode (without pressing any key)

Supported Chipsets:

Vivo
– MT6761
– MT6763
– MT6765
– MT6768
– MT6771
– MT6781
– MT6785
– MT6833
– MT6853
– MT6873
– MT6877
– MT6885
– MT6893

Infinix/Tecno/iTel:
– MT6739
– MT6761
– MT6763
– MT6765
– MT6768
– MT6781
– MT6785
– MT6833
– MT6877
– MT6893

NOTE: All devices with mentioned chipset and vendor should be supported

Tested Devices:

Vivo
– Vivo Y100 (PD2257F)
– Y22 (PD2226F)
– Y21 (PD2139F)
– Y15c (PD2140JF)
– Y30 (PD1987F)
– Y02 (PD2236F)
– Y56 5G (PD2230F)
– V15 (PD1831F)
– Y21A (PD2139JF)
– Y19c (PD1818HF)
– Y21e 5G (PD2102F)
– Y83 Pro (PD1803F)
– V25 Pro (PD2204F)
– S1 (PD1913F)
– Y19 (PD1934F)
– Y81i (PD1732CF)
– Y15 (PD1901BF)

Tecno
– Camon 20 Pro 5G (CK8N)

Infinix
– Hot 30i (X669C)
– Hot 11 (X689F)
– Hot 12 (X6817)

Added Samsung KG Unlock (New Method)
– Must connect in BROM mode
– Once it is successfully done, device should not relock anymore

Optimized Flashing Routine for Helio Chipset

Some minor bug fixes

Important Notes:
– You can flash device with both BROM and Preloader mode
– If default DA does not work, use own DA in custom DA
– Force BROM may not work on new security, use Test Point instead
– When using Test Point, you must select Preloader in PL (not needed when flashing)
– If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)

Added Infinix 2023 Security in Preloader Mode (Service Tab)

• Support MT6739/6X and 6833/77/93 etc.
• Enable BROM (Preloader Mode)
• Reset FRP (Preloader)
• Format FS (Preloader)
• Enable BROM will backup Preloader and Enable BROM to use other functions in BROM mode
• Use Disable BROM to return to normal condition

Added Partition Manager

• Tick “Print GPT in Log” to print partiton information in log for debug purpose
• Click on Boot to boot and list all partitions
• You can use “Read Scatter” to read firmware with selected partitions to write back later
• You click on “…” button to load any file to any partition and write using “Write RAW”
• “Erase” button will let you format selected partitions (all if you really need)

Added Customization Option in Scatter Flash

• You can select differnt files for a partiotion instead of default loaded in scatter

Updated Overall Flashing Function

Updated Preloader and EMI Data Parser

Updated Xiaomi Cert Patch Function

• Fixed issue on some modems with different patch addresses
• Improved overall modem patching and writing

Updated Patch Cert for Redmi 12C

Fixed Issue in booting completely formatted devices

Some other miscellaneous improvements

Important Notes:

• You can flash the device with both BROM and Preloader mode
• If default DA does not work, use own DA in custom DA
• Force BROM may not work on new security, use Test Point instead
• When using Test Point, you must select Preloader in PL (not needed when flashing)
• If you need to connect device in Preloader mode,
  you must select PRELOADER in connection settings, otherwise software will try to
  Crash Preloader (may not work on new security devices)

Note : Some features are device/OS specific and may not work on all devices.

What’s New:

Vivo

• Y53s (PD2103F)
• Y53s (PD2104F)

• You muse select correct model from list
• It will work even if NVRAM/DATA is fully erased
• If boot loop issue, then Wipe from Recovery and repeat operation
• Poco C3 (angelicain)
• Poco C31 (angelicain)
• Poco C55 (earth)
• Poco M4 Pro (fleur)
• Redmi 10 (selene)
• Redmi 10 Prime (selene)
• Redmi 10A (dandelion_c3l2)
• Redmi 10X 4G (merlin)
• Redmi 12C (earth)
• Redmi 6A (cactus)
• Redmi 9A (dandelion)
• Redmi 9A Sport (dandelion)
• Redmi 9AT (dandelion)
• Redmi 9C (angelica)
• Redmi 9i (dandelion)
• Redmi 9i Sport (dandelion)
• Redmi A1+ (ice)
• Redmi A1+ (snow)
• Redmi Note 10S (rosemary)
• Redmi Note 10S (secret)
• Redmi Note 11 Pro (vida)
• Redmi Note 11 Pro 4G (viva)
• Redmi Note 11S (fleur)
• Redmi Note 8 (biloba)
• Redmi Note 8 Pro (begonia)
• Redmi Note 9 (merlin)Fixed Mi Account Relock Function
• It was broken in 0.4, now should work fine

Updated Patch DM-Verity to Support Xiaomi Devices

Added Remove DM-Verity Patch Option

• In case you need to revert back to original condition

Fixed Desktop Icon being moved inside folder

Please uninstall old version and then install this one

Important Notes:

• You can flash device with both BROM and Preloader mode
• If default DA does not work, use own DA in custom DA
• Force BROM may not work on new security, use Test Point instead
• When using Test Point, you must select Preloader in PL (not needed when flashing)
• If you need to connect device in Preloader mode,
  you must select PRELOADER in connection settings, otherwise software will try to
  Crash Preloader (may not work on new security devices)

What’s New:

Added Xiaomi Patch Cert Method 1

• Use this function if you face NV Data Corrupted Issue
• Tested on:
• Redmi 9
• Redmi 9 Prime
• Poco M2
• In case of issue, make sure phone has MIUI v12.x

Added Oppo DL Error Fix:

• CPH1725
• CPH1859
• CPH1909
• CPH1911
• CPH1923
• CPH1989
• CPH2001
• CPH2015
• CPH2035
• CPH2083
• CPH2121
• CPH2185
• CPH2239
• CPH2269
• CPH2285
• RMX1821
• RMX1941
• RMX2040
• RMX2117
• RMX2189
• RMX3201

Added Internal Preloader for Listed Models

• No need to use preloader if you select a model
• Useful if preloader dump not work, for example if using TestPoint for BROM mode
• Motorola G10 (TA-1346)
• Motorola G20 (TA-1372)
• Motorola G31 (XT2173-3)
• Oppo A5s (CPH1909)
• Oppo A83 (CPH1827)
• Oppo A91 (CPH2021)
• Oppo F11 Pro (CPH2209)
• Oppo F17 Pro (CPH2119)
• Oppo F7 (CPH1819)
• Oppo F9 Pro (CPH1823)
• Oppo Reno Z (CPH1979)
• Realme 7 (RMX2151)
• Realme C15 (RMX2180)
• Realme Narzo 20 (RMX2193)
• Vivo S1 (PD1913F)
• Vivo Y11 (PD1930F)
• Vivo Y12S (PD2036HF)
• Vivo Y15 (PD1901FB)
• Vivo Y17 (PD1901)
• Vivo Y1s (PD2104)
• Vivo Y30 (PD1987BF)
• Vivo Y33S (PD2166)
• Vivo Y55 5G (PD2166F)
• Vivo Y81S (PD1732)
• Vivo Y91c (PD1818HF)
• Xiaomi Poco C3
• Xiaomi Poco M2
• Xiaomi Redmi 10A
• Xiaomi Redmi 10X
• Xiaomi Redmi 10X 4G
• Xiaomi Redmi 10X Pro
• Xiaomi Redmi 9C
• Xiaomi Redmi Note 10 5G
• More models will be added in next update

Added Special Internal DA:

• 6781
• 6785
• 6797
• 6833
• 6853
• 6873
• 6877
• 6885
• 6893

Added Patch DM-Verity

• You can find it in Bootloader Unlock functions
• Usefull if you flashed device and DM-Verity is again enforced

Fixed RPMB Read/Write/Erase Function

Improved Scatter Flashing

Some cosmetic changes and improvements

Important Notes:

• You can flash device with both BROM and Preloader mode
• If default DA does not work, use own DA in custom DA
• Force BROM may not work on new security, use Test Point instead
• When using Test Point, you must select Preloader in PL (not needed when flashing)
• If you need to connect device in Preloader mode,
  you must select PRELOADER in connection settings, otherwise software will try to
  Crash Preloader (may not work on new security devices)

Note : Some features are device/OS specific and may not work on all devices

Added Xiaomi and Oppo IMEI Repair

• Both IMEI is supported
• Please unlock bootloader first
• Incase bootloop after BL unlock, just wipe data from recovery
• Tested SoCs:
• MT6765
• MT6761
• MT6771
• MT6779
• Should work on others also except 5G chipsets

Changed Connection Settings for users familiar with old module

• Unticking Disable Auth will also disable options not supported without exploit
• You must use Disable Auth for secured phones
• Crash Preloader will not work on newer device and you must use Testpoint for them
• Preloader mode will not work for secured devices unless you have secure DA

Added Select Preloader Prompt

• If dump preloader failed, it will prompt you to select preloader
• For phones connected with testpoint, preloader need to be selected by user

Improved DA selection and handling

• Now software will try to pickup first supported DA from DA folder
• It has no effect if user has selected custom DA

Updated Mi Relock Fix

• Now devices with dual slot are supported
• Not all firmware are supported, if it does not work, try downgrade

Resized GUI to fit low resolution screens

Added Context Menu in Logs

Changed Installation Folder

• Now you can use old module in parallel with new module
• Once all functions are moved to new module, old module will be eradicated

Important Notes:

• You can flash device with both BROM and Preloader mode
• If default DA does not work, use own DA in custom DA
• Force BROM may not work on new security, use Test Point instead
• When using Test Point, you must select Preloader in PL (not needed when flashing)
• If you need to connect device in Preloader mode,
  you must select PRELOADER in connection settings, otherwise software will try to
  Crash Preloader (may not work on new security devices)

Note : Some features are device/OS specific and may not work on all devices.

– This is new module, replacing old MTK module
– No more boot related issue or complications
– Easy to use clean and organized interface
– Completely customizable options to use own DA/PL etc.
– More useful functions are on the way

Read Info in BROM/Preloader Mode

Scatter Flashing Support
– Both BROM and Preloader Mode are supported
– Customizable Flashing Support
– Super Image Config Selection for Oppo/Realme Firmware

Oppo OFP Format Flashing Support
– Direct Flashing of OFP Firmware
– Customizable Flashing Support
– Super Image Config Selection for Oppo/Realme Firmware

META Reset Functions
– Factory Reset
– Format eMMC
– Format UFS

Bootloader Functions
– Unlock Bootloader
– Relock Bootloader
– Unlock Permanent (Redmi 6A/9A etc)

Format FS
– Format FS (Safe)
– Erase Userdata
– Reset FRP

RPMB Tool
– Read RPMB
– Write RPMB
– Format RPMB

Security Functions:

Backup Security
– Backup critical partition in zip format

Backup NVRAM
– Backup only NVRAM in zip format

Backup NVDATA
– Backup only NVDATA in zip format

Format NVRAM
– Format NVRAM partition

Format NVDATA
– Format NVDATA partition

Restore Backup
– Restore all type of backup in zip format

Reset Oppo ID

Reset Huawei ID

Reset Mi Account

Mi Relock Fix
– Use this function if phone get locked after connecting to internet
– Bootloader should be unlocked first

Vivo Security Repair
– Repair IMEI/MEID/Serial
– Support Vivo phones with erased RPMB also

Important Notes:
– You can flash device with both BROM and Preloader mode
– If default DA does not work, use own DA in custom DA
– Force BROM may not work on new security, use Test Point instead
– When using Test Point, you must select Preloader in PL (not needed when flashing)
– If you need to connect device in Preloader mode,
you must select PRELOADER in connection settings, otherwise software will try to
Crash Preloader (may not work on new security devices)

Note : Some features are device/OS specific and may not work on all devices.

THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.

Supported functions:

• Read Info
• Reset FRP (For devices supporting this feature)
• Reset Locks (All Android Versions, Encrypted Userdata NOT Supported)
• Read Pattern (Android 5.x and earlier, Encrypted Userdata NOT Supported)
• Format FS
• Format FS (Advance)
• IMEI Repair in META / Boot Mode
• Backup NVRAM
• Restore NVRAM
• Reboot to META / FACTORY / FASTBOOT Mode
• Added Support for Helio CPU (MT6750, MT6755, MT6763, MT6739 etc)
• Disable Lock / Restore Lock for Encrypted Userdata
• Remove Lcoks for Encrypted Userdata for Vivo
• Factory Reset in META Mode (Vivo, Oppo and others)
• SafeFormat Option to let device format itself safely in recovery
• Added Support for Helio X20 (MT6797)
• Oppo/Realme Safe Factory Reset in META Mode
• Added Disable Auth to disable SLA/DAA
• Added Mi Account Reset
• Xiaomi IMEI Repair
• NVRAM/NVDATA Format
• META Reboot for SLA Enabled Devices
• MTK One Click Function Added
• Crash Preloader Added
• Added More Options in MTK One Click
• Added Bootloader Unlock / Relock
• Added RPMB Read/Write
• Added Vivo Security Repair
• Added Samsung Knox Guard (KG) Status Change
• Added Oppo ID Remove
• Added Huawei ID Remove
• Added Erase RPMB
• Added Partition Manager
• Vivo MT6765 Enable/Disable BROM – NEW!!!
• Xiaomi Disable OTA – NEW!!!
• Xiaomi Disable MiCloud – NEW!!!

MTK One Click

• No need to select any model.
• No need to select any DA/preloader.
• Simply tick required options and execute.

Supported SOCs for DAA/SLA Bypass:

• MT6261
• MT6572
• MT6580
• MT6582
• MT6735
• MT6737
• MT6739
• MT6753
• MT6755
• MT6757
• MT6761
• MT6763
• MT6765
• MT6768
• MT6771
• MT6779
• MT6785
• MT6795
• MT6797
• MT6799
• MT6873
• MT8127
• MT8163
• MT8173
• MT8695
• MT6885
• MT6595
• MT8167
• MT6592
• MT6833 (Dimensity 700 5G)
• MT6853 (Dimensity 720 5G)
• MT8590
• MT6758 (Helio P30)
• MT6781 (Helio G96)
• MT6877 (Dimensity 900)
• MT6893 (Dimensity 1200)

Disable OTA and Find Device (Xiaomi)

• It will disable OTA updates and Find Device also
• Bootloader should be already unlocked

Remove Orange State (Oppo)

• Removes Orange state warning on unlocked devices
• Supports most Oppo firmware

Enable/Disable BROM for Vivo MT6765 Devices

• Preloader Crashing for BROM does not work anymore in updated devices
• Use this option for MT6765 base devices to enter BROM mode
• After Enable BROM, you must use custom preloader for other operations
• Once finished, use Disable BROM to restore device back to normal condition
• You must use correct backup file made while Enable BROM

Improved Bootloader Unlock Function

Improved Read Device Information for Helio Devices

MTK One Click

• No need to select any model.
• No need to select any DA/preloader.
• Simply tick required options and execute.

Added Custom Preloader selection

• Some Realme and Oppo seems to have different memory region for preloader mapping
• If software could not dump preloader, you can use this option for custom preloader
• Software will ignore preloader from device when custom preloader is selected

Added Backup Security (Partition Manager)

• No need to manually select required partition to backup
• Use this option to simply read critical partitions
• You can use this backup to restore device security in some cases, like whole chip format

Added Restore Security (Partition Manager)

• You can restore critical data in case you accidentally formatted whole flash
• Usefull to restore critical partitions to original state

Added Format NVRAM/NVDATA (MTK One Click)

• Use this option for all SOCs supported by MTK One Click
• It is recommended to use Backup Securtiy before, as all calibration data will be lost

Updated Write Function

• Some SOCs like 6765, 6768 had write error sometimes
• Now this is fixed and should work fine

Updated Flashing Routine

• Improved Scatter file handling
• Improved customization of default files loaded
• Rewritten code to eliminate illegal index issue
• Tested on Oppo F17 Pro, Oppo F15 and Redmi Note 10 5G

Improved Read Preloader

• Adjusted timeout to eliminate any port issue in preloader read
• If it still could not read from a phone, it may be due to new security
• In such case, please use custom preloader

Added Following SOCs in Platform Selection

• MT6833
• MT6853

MTK One Click

• No need to select any model.
• No need to select any DA/preloader.
• Simply tick required options and execute.

Added Partition Manager

• Use connect button to boot and list partitions

Read Partition

• Tick partitions you want to read and click on Read

Write Partition

• Tick partition, browse and select file to flash
• Once selected for all required parts, click on Write

Format Partition

• Tick required partitions and click Format
• Be carefull not to format critical partitions
• It is recommended to backup partition using read before format

Added Erase RPMB

Improved Flashing Option to fix S_FTHND_ILLEGAL_INDEX error

Thanks to:

• All users for their continuous support

MTK One Click supports most phones regardless of Brand and Model

Important

• Features introduced may work on other devices too, which are not litsed here.
• User needs to untick By Model checkbox to be able to select Platform manually.
• For manual work, just select Platform and DA.
• For new secured devices, use Disable Auth, and select Preloader.
• Rest operations will work same.

Note : Some features are device/OS specific and may not work on all devices.

Added Oppo ID Remove

Added Huawei ID Remove

• Do not use this function for Non-Huawei Devices

Added Samsung New FRP Method

• New Method added in FRP Reset in MTK One Click
• Tested on Samsung Galaxy M32 5G

Improved MTK One Click functions

• Improved Format FS / Erase FS
• Improved FRP Reset Function

Fixed Hang on Preparing Device

• This issue was caused by libusb driver installed on class level or for all devices.
• Now device will be scanned properly avoiding hang

Some cosmetic changes

• Now Read RPMB, Write RPMB, Remove Oppo ID and Remove Huawei ID are combined in combobox.

MTK One Click supports most phones regardless of Brand and Model

Important

• Features introduced may work on other devices too, which are not litsed here.
• User needs to untick By Model checkbox to be able to select Platform manually.
• For manual work, just select Platform and DA.
• For new secured devices, use Disable Auth, and select Preloader.
• Rest operations will work same.

Note : Some features are device/OS specific and may not work on all devices.